vy headunit

[pukka]

i pulled the head unit out in my vy executive to have a look at the wiring for putting an amp in. when put back in nothing works on it but has power to it. all i can see is the time.
any ideas to help?
thanks

[PRAVX II S]

make sure all the plugs are properly plugged in.
and aslo check if the antenna is plugged in.
I have had many cars come in were the antenna is not plugged in and the deck wont work.

[pukka]

so how would i go about that. so the antenna would be the round one in the corner right? and how could i get to that without removing the unit again? just had a quick fiddle but didnt really get naywhere?

[PRAVX II S]

Take the deck out to do it properly mate becasue you got to check all the connectors if there are plugged in properly.

[PRAVX II S]

so how would i go about that. so the antenna would be the round one in the corner right? and how could i get to that without removing the unit again? just had a quick fiddle but didnt really get naywhere?

yeah the round one should be the antenna make sure its all plugged in.
maybe you forgot a plug and its left in the back somewere.
this is the factory deck or a aftermarket deck?

[pukka]

factory
will try that

[pukka]

well now im confused.
i realised that i cut wires from the old nokia hands free kit and started to wire them back up. i have the stereo working but only the volume on the head unit and steering wheel controls work. sorry i missed that info b4 about the nokia thing. should i just re wire all the wires from the nokia kit?