I just wanted to let you know that Greg is now able to install the CK 100 kit with the factory button and it works great and also get the Bluetooth audio streaming working throught the car also and it is clear. I had greg isntall it on the weekend for me it took some time to work everything out but he got it working for me and it was worth the wait. Once again Greg thank you for all help.
I had greg isntall it on the weekend for me it took some time to work everything out but he got it working for me and it was worth the wait. Once again Greg thank you for all help.
Iv been looking for a suitable / cheap enough bluetooth kit for my phone, was thinking of the CK-7W, but want music streaming also. I found a few threads on the CK-7W, but nothing on the Ck-100, so now that I know it has been done, im getting excited.
A few questions on the install?
Is it just the same methodology as the CK-7W installation?
If not, any chance in getting a write up or photos on the install?
Do you know if the radio aerial stays down during music streaming?
If you use navigation on your phone, do the commands get played over the stereo?
Does this work while the radio is on, or only during music streaming?
Do the volume controls on the steering wheel still function for radio and music streaming?
Last edited by geekness; 18-05-2011 at 07:44 PM.
Reason: added question
I was speaking to Greg today about the kits as I need something for my CK-7W, and he's not too keen on working on the newer kits such as the CK 100 because of the stuff around. He told me he's done a couple of installs (Ie you guys), the CK-7W was far easier but now the unit is obsolete so the interest is gone in them.
Geekness, in all honestly this is the best guide Bluetooth_install Its what I originally followed when I installed mine. Its on a US GTO but everythings the same, obviously the panels are the other way round!
Thanks for the reply. Will have a look.
If I think it may be easy enough, I will let everyone know, and maybe even do a simple procedure after completion.
Just wondering how you went with your install? I have a VZ that I need to hook up the CK-100 to and a mate just said I need to pull the stereo out to wire the ISO cable in I didn't agree with him so I thought I'd check here first to see how you went?
Just bought one from fleabay for under $100. Just need a few good tips and I'll get started. I've tried getting in contact with Greg from ASR, but no luck yet.
I want to incorporate it with 2 buttons that replace the wheel. 1 button to replace the press, 1 to replace the turning (up or down equals left or right.)
so if anybody has a way to get hold of Greg, that would be great, cos I know he can get custom buttons, and I'm sure he would have some great advice.
Also, if anybody has any advice, I would be in your debt. The link given by torquative is no longer active.
I had mine installed by greg it took a long time to complete he needed to hook up the CK100 to the aux for the bluetooth streaming to work and he also converted the wheel button into a normal phone button and it all works like a treat.