Alpine R Splits connection

[Dan_VX_Spac]

Ok i have lost the manual and not sure how to hook up my splits. I have them going to an amp.
Where do the wires go (IN, WF and TW)??

[calais_cruzin]

WF is the woofer, soo conect that to the speaker
TW is tweeter, soo connect that to the tweeter
IN is the imput, soo u run ur speaker cable from the sorce eg headunit or amp to this, then that signal is split thru the crossover for high/low for the speaker/ tweeter

[Dan_VX_Spac]

Cheers thanks haps for that

[Philthy]

WF is the woofer, soo conect that to the speaker
TW is tweeter, soo connect that to the tweeter
IN is the imput, soo u run ur speaker cable from the sorce eg headunit or amp to this, then that signal is split thru the crossover for high/low for the speaker/ tweeter

Thats right, but do Type-R's have tweeter adjustment in the crossover? I know Type-x's had jumpers to compensate for different angles/distances between the woofer and tweeter, as well as another set for tweeter level adjustment.
If it does, you might be able to fiddle around and end up with a good sound but mine was quite complex with a combination of 2 or 3 jumpers being moved around to about 5 different positions depending on the installation.

[padrickz88]

Yeah they do have that Philthy..... I haven't actually played around with mine lol, put them in and sounded good lol

[Dan_VX_Spac]

Yeah i havent touched them either they sound good atm.

[Philthy]

Yeah they do have that Philthy..... I haven't actually played around with mine lol, put them in and sounded good lol

I guess it depends how fussy you are with your music. I spent about 3 hours yesterday fiddling with compressor and eq settings for a party tonight so I'd say I'm pretty picky.

When I was setting mine up, I couldn't tell anything was wrong, but then I measured the distances and angles and set up the jumpers right and it all kind of just fell into place.