amps cinundrum!

[VRoooom!]

need a new amp in my vr commo.

i was gonna buy a 1200W Fusion Powerplant 4 Channel Amplifier.
but my old amp only has screw cables which the fusion one doesnt have.

i also came across a FUSION 600 WATT 4 CH AMPLIFIER which is compatible with screw cables, but its only 76 WATTS RMS PER CHANNEL @ 4 OHMS.
problem is its weak as, ive been told

what can i do from here?
is it worth getting a 1200w with cables fitted in?

thanks guys
Vroooom!

[2LOUD2OLD]

what do you mean when you refer to screw cables?

[holdenboy]

I think he's referring to the normal screw terminals that requires the cable to have a "U" (fork) or ring terminal fitted to it, as opposed to the insert type terminals with an allen key / phillips head screw which clamps down on the cable.

Its no real issue though, you will just need to cut off the terminals, strip back about 20mm of insulation, insert into the hole and tighten up the screw. If its the other way round you just need to buy some ring / fork terminals to crimp / solder onto the cables.