Need some help with Sub/amp placement with gas

[98VTMAN]

Hey guys i had gas put in last week and now i am getting my sub and amp put back in tomorrow but i have a question on where to mount the amp.

The amp used to be mounted on the back of the rear seats but now i have the tank in the back that is not an option.

I need to have the amp mounted in the boot somewhere and not on the back of the sub box. The reason is that i will need to take out the sub occasionally to use the boot space for a cricket bag which will only fit without the sub.


Any ideas Guys??? Thanks alot

[Luke0011]

a panel made from at least 9 mm mdf ( prefer 12mm ) on either side and trimmed in carpet will do the job, its a little tricky to make and look like it was factory fitted but easy enough to make a basic panel to firmly mount your amp.

[H0LD3N]

a panel made from at least 9 mm mdf ( prefer 12mm ) on either side and trimmed in carpet will do the job, its a little tricky to make and look like it was factory fitted but easy enough to make a basic panel to firmly mount your amp.

As Luke0011 said... I have a template for both sides if your interested, I can trace it onto a piece of paper and send it off to you. Then all you have to do it trace it onto a piece of carboard and then trace it onto the MDF (or just trace it directly onto the MDF) and cut it out with a jigsaw. Easy done