Line Out Converter (LOC) HELPPP!!!

[kizza50]

got a stock eurovox HU in my VX i think it is from memory.. anyways head units need line out converters 2 give u the RCA sockets and transfer normal sudio signals into something bla bla bla.... anyways... How do i put it in??????????? on the converter its got L+ :green, R+ : grey , L- : Brown and R- :Black.. any help or advise to put this in would be much appreciated. Has anyone used these?????????

[axemurderer101]

you just splice into the speaker wires behind the headunit

[kizza50]

im a newbie, sorry... umm so u mean that just say the left + wire on the head unit is green, i find that one and twist it onto the green cable on the LOC ???

[axemurderer101]

these should be the speaker wires behind you headunit
Front Left (+) - Tan
Front Left (-) - Grey
Front Right (+) - Light/Green
Front Right (-) - Dark/Green

just use crimp terminals to join the LOC wires into the speaker wires
eg cut the Front Left (+) - Tan and put a butt terminal on the headunit side of the wire, then
put the green wire from the LOC and the other end of the wire you just cut into the other
side of the butt therminal and crimp together. then just repeat for the front left neg wire and
front pos and neg wires.

this is a butt terminal if you didnt already know

[scozz76]

I prefer to solder and heatshrink. Not as bulky.

[kizza50]

yes, thats very helpful! i no this is basic stuff n u are prob thinkin is this guy that dumb lol... but ye i just wanna make sure its all right. where do i put the LOC as the wires arnt to long?? which direction do i wire it?? also beacuse my stock head unit hasnt got a remote cable spot, the remote cable from the amp needs to be connected to the accessory wire from the bundle in the head unit is that correct??? and that will mean my accessories will be powered by my amp aswell???? do i completely cut the accessory cord and re attach to the remote cable cord??? or just strip the casing and attach and tape up???? if people could reply asap coz a few mates coming over tomorrow to help assemble!!! thanks