Just wondering what speakers kind of speakers a vs has? one of my speakers is not working and I am thinking I might try and replace it, but seeing as everything else is stock, I would probably try and replace it with a stock item.
CHeers.
Edited, wrong info given...
Last edited by HCVP; 05-12-2009 at 11:30 PM.
VR and VS commodores have 6" splits in the front (mid-range/mid-bass in the door pod, tweeter in the dash where the A-pillar meets the dash) and 6" coaxials in the rear.
<<<< The information went data way! >>>>
When I got my VS I was actually really surprised how good the stock stezza was. Im using an Aftermarket HU and Sub with Stock speakers and I'm happy with it for the moment till I allocate some more dosh to the StezzaGood luck, like CommoVP said, prob just post in the WTB section
![]()
Oh yeah 6 inch splits, memory relapse for a bit their![]()
Cheers for the info!
^^^^hahaha, thats what i like to hear!![]()
150db in a commodore =
It also depends on what you call adequate too......not having a go or anything, so dont take offence.
Some people think 5w 4" dual cone speakers are fine for a car stereo system, while others wont put anything less than a few thousand watts and a few thousand dollars worth of speakers in their car.
My point is, sound is very subjective. If youre happy with the sound, thats all that matters![]()
150db in a commodore =
no offence taken.
its true, peoples needs vary, and some people only need a stock system, others need their ears to bleed!
love to upgrade my system but i cant afford it!!
I have a VS too and am trying to find a way of mounting some 6'' by 9''s in the back, it has proved to be a bit a mission. Any ideas would be awesome!!!
Mounting? Aren't the holes already marked out in the parcel shelf? If they're not, look in from the boot, mark out enough of a hole for the back of the speaker and a little more to fit and then cut.. Mine came with them prefitted.. Only ever had to cut speakers out of a few old holdens and fords. Get some spacers from autobahn for the speaker to connect to.. wiring etc and voila!!!
The stock rear holes in a VS were only designed for a 6 inch speaker. The only way to fit a 6x9, is to use a spacer (such as this one) APF69HBL : 1 Pair 6x9" (152mmx228mm) Black Vinyl Fibreglass Speaker spacers :: Speakers
You'll need to mount them going length way's aswell. This about the only way you'll be able to mount them, without cutting anything anything.
are you sure its not 6.5 " in the back?
Yes. Quite sure.
Im 100% sure there not 6.5" in VS , if you want sick by nines then your going to have to remove the steal bridge te speaker mounts to thats under the moulded shelf.
Right click save as . .
http://shoppingsecure.com.au/ - JC's Rep
PM me or email philthy@shoppingsecure.com.au for all your stereo needs