6x9's in VT

[emmtee83]

Hi guys.....

Will standard 6x9's fit into the rear shelf of a VT? and do the 6x9's sit over the pre-drilled holes?

Thanks

[holdenboy]

Yes, you will need to remove the sections of metal that are tack welded into the pre-cut holes of the metal. You'll also need the grilles for the top of the parcel shelf, here they are:

http://www.aerpro.com.au/list.php?pc...+Grey&cat_sno=

1. Remove rear seat and parcel shelf
2. Remove metal sections
3. Screw in new speakers / wire them up
4. Cut holes in parcel shelf for grilles
5. Insert grilles into parcel shelf and re-install everything.

[VQXTC]

Just be aware not to cut on the line in the shelf for the grilles. If you do the grilles will fall straight thru... Cut approx 1/2 inch inside this line and you will be fine.

cheers

Simon

[trentvy]

Just be aware not to cut on the line in the shelf for the grilles. If you do the grilles will fall straight thru... Cut approx 1/2 inch inside this line and you will be fine.

cheers

Simon

where were you when i did mine Lol. i had to custom attach mine :P
lots of duct tape :P