[VR-VS]grounding the amp in the boot

[Rhys J]

This has probably been asked before numerous times but i cant find an exact answer in my search results.. Anyway i have just installed a system in my VR but i cant find an easy place to ground the amp without drilling a hole in the body, any suggestions?

thanks guys

[axemurderer101]

show us where you are putting your amp

[Fonzie]

Where the child restraints bolt on from the top, Use that spot and that bolt from the bottom... Assuming you aren't using the child restraints, that is.

[sweefu]

Or sand back where the middle seat bolts onto the chassis, use that bolt there

[nathanVY]

i grounded mine to one of the smaller seat bolts, give it a sand before you earth it.

[HCVP]

I'm not sure if the VR-VS are same as earlier models, but with the VN-VP, i remove the rear seat,and you will see a number of holes in the frame to choose from.I've always used these, even without sanding them back sometimes,simply find a suitable size bolt, using an o-ring on the earth wire, and i've never had any issues.I've run some fairly large amps this way also.I'll use a different hole for each earthing point though, not that it probably makes any differnce.

[Rhys J]

Thanks guys, i ended upjust screwing it into the top metal part of the boot, probably not the best place but hey it works fine.