HELP! Can't Find Antenna Wires In Factory Harness!

[sweefu]

I'm putting an aftermarket H/U In my vy berlina with the up/down antenna control.

First of all, i have no white wire which is one of the two wires to adjust the antenna.

All i want to do is connect the antenna to the acc. wire so when the ignition is one, the arial is up, when ignition is off, arial is down.

I have the blue antenna up but no white anteanna down... What do i do?!

Mid install here haha.

[holdenboy]

I think you'll have a yellow wire with a red stripe?

If so, connect the blue (or blue/white) wire from your head-unit to this wire. Leave the other wires, they are only for connecting to a switch to raise / lower the antenna to a custom height etc.

[sweefu]

I ended up just leaving it all together. Though when i turned the car off and locked the door, the antenna still went down? Odd, it seems to do it when i lock the car. The dash is still apart though, so i'll do what you suggested and see how that goes.

Thanks mate.