Hi Guys
Installed a New sound system yesterday. Used a mono block amp for the sub
Last edited by SCANDZ; 03-04-2012 at 11:44 PM.
have you checked that the speaker amp is turning on?
also check your fader isn't set to the rear
that's probably where i would start
check the amp is wired properly.
and you should not be running bass through stock speakers... high pass them at about 80-100hz.
could maybe loose connetions on either earth or at the battery
could have a short on the speaker wires, eaasiest is to test this with a multimeter
maybe check the RCA connections on the amp and at the headunit