Microphone for aftermarket stereo
Hey guys, I'm about to install a JVC headunit with Bluetooth in my 2005 SV6 and it comes with an external microphone. I was just wondering what the best place would be and where people have put they're mic. when they have installed a aftermarket bluetooth stereo.
Cheers
I haven't ever done this myself, though in VY/VZ I have seen a lot of people run the wire up the A pillar and have the mic poking out of the A pillar at the top of the windscreen if that makes sense.
My VY Berlina Build Thread - Mainly Stereo
http://forums.justcommodores.com.au/...ure-heavy.htmlOriginally Posted by xVisions
Hand over the dog bikkies
A pillar is best
Welcome to the internet where people have opinions that you might not like
Blu-tac it to the steering wheel.
Kicker - Livin' Loud :)
duct tape works a lot better then blu-tac imho..
but a pillar sounds like a more suitable location
Hand over the dog bikkies
Oh and get double sided tape from a hardware shop or something. The tape provided is crap. I made the mistake of not realising when I first started doing installs. Queue customer rage when it falls.
Welcome to the internet where people have opinions that you might not like
I had mine behind the steering wheel and and in front of the cluster , as its in straight line of my voice and also the Kenwood manual recommends it there. Never had any trouble.
cheers for the replies, was thinking the A Pillar and by your replies sound like it is the way to go
Last edited by rock86; 20-07-2011 at 01:06 PM.
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote