running power canle for amp in my VP

[Johngh1988]

Hey ive just bought myself a vp and im putting in my stereo n i cant figure out where the wires come through into the interior behind the glove box to run my power cable for the amp can neone help

[VQXTC]

Hey ive just bought myself a vp and im putting in my stereo n i cant figure out where the wires come through into the interior behind the glove box to run my power cable for the amp can neone help

Is your car manual? If it is then there is a grommet on the passenger side for the ecu....depending on the size of the power cable. If its auto then there is a rubber grommet near the brake booster which can be used.....

Hope this helps.....


Lets work as a TEAM and do it MY WAY!!

[Johngh1988]

its auto can you explain where to find the brake booster

[Johngh1988]

its 8 gauge power cable

[WiLo]

the rbake booster is the big cylinder sort of thing on the drivers side which is connected to the brake master cylinder.
do a search for the VS amp install thread i made, at the bottomw of it is how i did the install in my VS which i imagine would be very similar of not the same as a VP

[RVN 355]

Gromet under the brake booster, run the cable from the battery thru the gromet, out under the side kick panels or carpet,don't run power cable along with audio cable you will get radio inteference....

Attached is a pick of a vp commodore brake booster care of www.ebay.com.au

[Johngh1988]

thanks will try those now

[RVN 355]

not a problem , make sure you connect ur power fuse end to the battery last... & make sure it is tight.

[WiLo]

as for leaving the fuse out, i just dont connect the power cable untilt eh very end, but its just the same as leaving the fuse out, more a case of personla preference, because i know to get the fuse out in my car is a PITA.

[Johngh1988]

it working behind the brake booster thanks for the help everyone

[Johngh1988]

successful install n the mtx is pumping hard thanks again everyone