amp help

[brohawk]

[URL=http://imageshack.us][/URL

hey guys n girls i was just wondering about amps what would be the best for these 750watt audiopipe 12" subs? i dnt want to spend to much but i want something to thump the subs? any ideas?

[azkwazere]

Price Range...?

Ill reccomend, RESPONCE amps to you. Like i do everybody.... Low Price, Medium Quality.

aZk.

[garfa]

response gets the thumbs from me.
budget?

[StoneX]

What is the RMS rating on those subs? And what impedence voice coils they have? You need to know that before picking an amp.

[brohawk]

the guy im buying them off recons the audio pipe GD3001 2000 WATT MONO BLOCK DIGITAL AMP
OUTPUT 1000 WATTS RMS @ 1 OHM (FULLY 1 OHM STABLE ) CERTIFIED BY IASCA
TESTED TO CEA (USA) STANDARDS, DISTORTION LESS THAN 0.5% THD.
MASTER SLAVE FUNCTION AT 4 OHMS. SIGNAL TO NOISE RATIO 60dB.
RCA INPUT SENSITIVITY 0.2 - 5 VOLTS, INPUT IMPEDANCE 20 K OHMS
LOW PASS FILTER 40-250 Hz / 24dB OCT, SUBSONIC FILTER 10-50 Hz / 24dB OCT.
FREQUENCY RESPONSE 10-300Hz. / 4G INPUT

the subs are 750watt rms 1500watt max

any help

[garfa]

great and ask the guy the impediance and power rating of the subs and how they are wired. (parallel or series).

[Garth]

[URL=http://imageshack.us][/URL

hey guys n girls i was just wondering about amps what would be the best for these 750watt audiopipe 12" subs? i dnt want to spend to much but i want something to thump the subs? any ideas?

you wanna change your signature please? that's not nice

[brohawk]

look garth its a song ok ive taken alot of flack about it an i like it coz it fits me and if u dont like me u dont like me i dnt care thats basically what it is saying but its a line from a song so dont be so uptight. im NOT sying ne1 who reads this should suck my dick. do u know my reputation? do you know me no you dont.

so relax

[StoneX]

Dude, that is the site admin asking you to change your signature so that you don't offend people. Do as you are asked and don't be a tool.

[_Mukas_]

i got asked to change..... "i dont care what she says...if it fits its the right hole" and did so gracefully....pull ya head in brohawk, your not untouchable because its a song lyric....*shakes head*

[garfa]

hehe, someone is going to get owned (or banned!)
by the way my name is garth as well, so go **** yourself! (if that was intended at me.)

[PaRaDoX]

a responce 2x150W rms will do you the trick, drop it down to 2 ohms which would leave you with a fair amount of power per speaker....
dont get confused by the 2x150W rms, when bridged its actually around 500W rms, then if dropped to 2 ohms should leave you with 700-800W rms so thats atleast 350-400W rms per channel, that leaves you with plenty of head room to play with


people say medium quallity, but in reality,
its a POWERAMP... with a BASIC EQ in it......
with the right EQ setup it can sound as SH*t or as good as u want it to...
its also about tuning your system, most people dont have a clue about it and claim a product is crap because they dont understand how to make it sound good, ive "better" quallity amps before and they'res not that much of a diffrence

[StoneX]

That Jaycar amp isn't 2 ohm stable when bridged... I've seen the old model cook when wired to that load.

[brohawk]

tuning isnt a problem i play music n install car stereos then tuning them and ive been doing it for years so its piss easy

[brohawk]

but its all good i spoke to my boys at my local stereo place they will hook me up with my new hed splits and 2 1000wat kenwoods for cheap. n ill just build the custom box that i was going to. so when it starts comming together ill post up some piks system should thump when im done.

cheers every 1