whats FUSION Like????

[Haydz]

hey guys and girls im looking at getting a full system for my vr and i was going to go with fusion throughout what do you guys think of fusion and are they good quality as theyre mid priced i figure they are an ok brand anyone have any info/demos even good models i could get thanks alot

[arrow224]

I think the general consensus is that Fusion are ok for a budget system, and are designed more for looks than sound.

However, sound is a personal thing, and if it sounds good to you, then go for it.

[VLDavo]

if u go for the higher lever fusion gear its good.. i had a 15 inch fusion powerplant sub the ones with the massive cushioning and 1 channel 1500W mono amp in my old vl and it hammered really well..

[Haydz]

thats what i was looking at actually its a 12 inch fusion sub powerplant with a monobloc 1000w amp installed for around 650 and possibly even the power plant speakers not sure if theyre any good though

[JBDrifter]

Don't limit your whole system to one brand. Have a listen to different brands and see what you like best. Unless of course you like all the fusion gear and can get a good deal that fits into a limited budget.

[garfa]

fusion is fusion........... nothing amazing, just another brand to add to the pile.......
i agree with JB, discounts can be had if you buy all at once.

[V-ahhh]

well i got fusion front splits and rear 3ways and im really happy with the set up. but as said at the end of the day its what sounds good to you.

[cxcxcxvcvcvc]

i have 2 12inch power plants running of a 1600 wrms jonah lomah d class amp and the bass is sweet! its not that loud out side of the car but its pretty damn good inside the car! imo When i was looking for car audio fusion appealed to me for the best bang for your back in its price range, but each to there own, & my advice is to stay away from fusions cheaper gear as you get what you pay for! also i cannot say enough about there warranty as i had my d class amp repaired for me when it fell out of its warranty by nearly a year! heres a pic of my amp, (looks a bit dirty this was before it went to fusion to be repaired)

[Haydz]

ok thanks for that guys i cant buy anything for about another month so when i have money i will get the front speakers then the rears and then the sub, another thing ive got a 50wx4 head unit will i be able to get decent sound out of it with aftermarket speakers while i save to get my sub and amps(i intend to get a 4channel amp for the speakers later on) thanks heaps

[wh33lzz]

Definately mix and match your brands mate, there isnt one single company that produces every component with the same level of success.

Fusion? I wouldnt touch anything of thiers other than the powerplant subs, and even then, only for SPL duties.

[Silver surfer]

Well am getting some new stezza gear, got a great deal on some stuff.

2x Fusion 12", 1200watt dual voice coil, heavy duty Powerplant subs. PPSW12H (rrp $340each)
1x Fusion 2channel 1000w amp. NVAM10002 (rrp $499)
All up it came to $1180. But lucky me is only paying $550 that a big discount of $630.

Now its time to draw up a custom boot design and get it made up only got 8 weeks till its all payed for.

[impulsesv6]

amp and subs look good, system should crank!!

[Silver surfer]

i got a set of fusion 6" splits here to go in the front aswell and need to pick up a set of 6" 3ways for the read doors still

[Ra1d]

Well am getting some new stezza gear, got a great deal on some stuff.

2x Fusion 12", 1200watt dual voice coil, heavy duty Powerplant subs. PPSW12H (rrp $340each)
1x Fusion 2channel 1000w amp. NVAM10002 (rrp $499)
All up it came to $1180. But lucky me is only paying $550 that a big discount of $630.

Now its time to draw up a custom boot design and get it made up only got 8 weeks till its all payed for.

thats what i have set up in my vs mate, except with a 1500w option audio mono, i can guarantee you'll be happy with them as far as fusion go as a whole, i definetly recommend powerplant and i've heard the nv range is better...forget about encounter.

[Morton]

Just for interest's sakes, I've got a couple of Fusion Powerplant 5*7s up the back of my VP. They're darn tootin' value for money. Love 'em. Even my Encounter sub + amp is good for the money I paid

[garfa]

when ever i see BIG discounts on audio gear i think whats wrong?
gear sells itself usually..........

[Silver surfer]

as i walked in to the shop the fusion guy was walking out they had just cracked a massive deal with them

[Silver surfer]

well heres the start to the box

[cxcxcxvcvcvc]

well heres the start to the box

looks sweet mate those subs will crank in those box,s! are you going ported or sealed? imo i would port the subs into the back parcel shelf (use the factory speaker holes to port) then use a custom rear parcel shelf with new speaker mounts on the parcel shelf for your rears! but thats just me

[Silver surfer]

haven't decidie to seal or port yet but if they are ported the opening will come out behind them and into the space where the seat folds down.

[garfa]

usually try to port of the same side as the driver. generally it will give the least cancelation.

[goldencommodore]

i have got

6.5" powerplants front
6" powerplants rear
12" powerplant sub
alpine headuint
response 800rms mono amp

sound awesome to me. pumps hard aye. and all the speakers r like 2 years old and still perfect. the sub is a little bit quieter, might be my box but im soon to make a new box.

[Joe Peeps]

Well am getting some new stezza gear, got a great deal on some stuff.

2x Fusion 12", 1200watt dual voice coil, heavy duty Powerplant subs. PPSW12H (rrp $340each)
1x Fusion 2channel 1000w amp. NVAM10002 (rrp $499)
All up it came to $1180. But lucky me is only paying $550 that a big discount of $630.

Now its time to draw up a custom boot design and get it made up only got 8 weeks till its all payed for.

is that amp for running the subs? they arent a good match at all

[Silver surfer]

yer it is and there is no issue with them at all sounds great

[impulsesv6]

is that amp for running the subs? they arent a good match at all

why not? - explanation needed