Hi, i just finished insatlling a pioneer deck into my VY and everything works fine except when i program the channels in, every time i turn the car off it goes back to factory settings and doesnt have the channels saved anymore. is this a wiring problem or is it a head unit setting problem
Hey Younglion.
I reckon it's a pretty simple wiring problem - my guess is that you've reversed the +12Batt and Acc lines. +12Batt should connect to a line that's always powered, that's what provides the "memory" function for your presets etc. If you've accidentally wired this to the Acc supply, that would explain why when you switch off it loses these.
Have a closer look at your wiring, I reckon you'll get to the bottom of it soon.
Cheerz!
New look ASR Website online now!!
www.asr-audio.com.au
.
Interior lighting and audio specialties
for VT/VX & VY/VZ Commodore / Monaro
********************************
NOW VE DASH LIGHTING CONVERSIONS!!
PLUS TECH2 DIAGNOSTIC SERVICES
********************************
JBL Car Audio dealer
thanks mate will go check it out
yep thanks guys problem fixed! umm another question kinda off topic but the speakers in the back doors, im thinking of just extending the wire from the stock speakers up to the parcel tray where my 6x9 are, im not putting an amp in for a while so i thought this will do me for now. will that work?
Power is measured in DECIBEL
yeah i meant disconnect the back door 5 w speakers and just use the wire to connect the 6x9 surely the ywould sound better than the 5w stockies yeah?
Yeah you can do that if you want. Personally I would wait till i got an amp and upgrade the front and rear door speakers at the same time. You may notice some improvement now with the new headunit, other than slightly better bass response you wont notice much unless your sitting in the back, plus you might as well use them if you got them already.
Power is measured in DECIBEL