Crossover inputs/outputs...

[neel]

hey guys

i am installing a setof infinity kappa splits in the next few days and i was wondering what all the inputs and outputs on the crossovers mean...
does anyone have any diagrams of the basic inputs/outputs on a crossover...
how do i wire it up...
i need help ........

thanks

[r_i_d_a_h]

wires coming from the head/amplifier unit should be going into the INPUT of the crossover

wires coming from the tweeter and mid-range should be going in the OUTPUTS of the cross over

[SweetWagon]

Usually much like this. All the inputs/outputs should be labelled at the wiring terminals. Any questions just ask.

[neel]

ohh k... thanks for the quick reply..
so there is 3 sets of positive and negative wires thats should be connected to the crossover..
wotdo all the db and other settings mean on the crossover.....?
thanks again

[Ra1d]

its pretty easy to understand mate, there will probably be a manual included with the splits.

here is a basic diagram -
Component Speakers Installation Guide

[SweetWagon]

ohh k... thanks for the quick reply..
so there is 3 sets of positive and negative wires thats should be connected to the crossover..

Yes

wotdo all the db and other settings mean on the crossover.....?

Test the different setting after you install them. See what sounds the best to you. Its all explained in the manual.

[neel]

ok cool..
its not as complicated as i thought..
il just read the manual when i get them...
thanks for all the help guys..