OK guys,
I've pulled down the fuse panel, removed the side vent and unscrewed the panel that hides the splits but it doesn't want to budge. I don't want to use too much force, am I doing this right? It seems very solidly in place!!![]()
Never Late In A 308! OH DEERE!
Mate, if you've never had them out before they can be bloody tight!!
Try pulling from both ends of the panel - in towards the centre, I just jam the ends of my fingers into the vent holes....
You need to pull it back towards yourself at about the same angle as the windscreen - it will come out, but it takes a bit of effort the first time.
Cheerz!
New look ASR Website online now!!
www.asr-audio.com.au
.
Interior lighting and audio specialties
for VT/VX & VY/VZ Commodore / Monaro
********************************
NOW VE DASH LIGHTING CONVERSIONS!!
PLUS TECH2 DIAGNOSTIC SERVICES
********************************
JBL Car Audio dealer
If i do it wrong will i f*** it completely?
Never Late In A 308! OH DEERE!