i have a question were does everyone hide the wires for there amps and if its under the seat how???? if u guys wouldnt mind could i have some pics thanks![]()
Where the seat bolts to the floor there is holes in the carpet, feed the wire through those and then be careful when putting the seat back in that you don't crush them.
ahh didnt think of that thanks how would u bolt it to the floor like wat would u use or did u use
Some people put a bit of MDF under the carpet and screw through the carpet into the MDF. Others use velcro on the bottom of the amp and it just grips to the carpet. I'm sure there's other ways as well.
i like velcro cause i got some here haha thanks would u suggest this or in the boot and if in boot were would u mount it
It's up to you... Under the seat is well hidden, but can be damaged by careless back seat passengers kicking it. In the boot it harder to find a flat surface out of the way and you need more cabling and you have to pull more of the car apart, but it's less likely to get damaged.
I always use the boot as I like to able to adjust my amps easily if needed.
ive got 2 amps 1 under each seat, for the wires i just cut a small hole in the carpet and fed the wires through that as for mounting them mine are just sitting there they don't really move around so im not worried. if my amps were more expensive i would of mounted them in a better way but at the moment i only got a couple of cheapies
if u lower the seats like up and down does it touch the amp????
still thinkin on were i should mount it cause i dont want all the wires showing im leaning toward the boot at the moment
ohh i didnt think of that thats a good idea it would look much neater thanks