bigsmookingturbo
New Member
- Joined
- Dec 17, 2009
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Members Ride
- vr ute
this is my first post on here so don't shoot me down in flames. so i have fitted a vp motor and manual gearbox into a vr ute. all is done but a few wires. i have used the vp manual engine loom due to the cam angle sensor not being present on the vp motor. i have fitted the vp ecu in the vr and it is all pluged in apart from the white multi plug as i noticed a few different coloured wires and not haveing a wireing diagram have come to a stop. i have been told this is an easy fix and just need to change a few wires round and all will be good. there is also the issue of speedo wireing and o2 senser as these to are different. so are there any of you lot out there going to shed some light on these issue's. i know this conversion has been done plenty of times but i'm new to holdens and need some help from you experts out there