Door handle LED Illumination...

[holdendude]

Hey everyone
I want to put LED globes in each of the interior door handle's, but i only want them turned on when i turn all the other lights on, so im guessing wiring it to the light control dial would work, but any ideas on where the wires should be connected to, the dial or splice into the wiring and run it from there? And which wires/terminals should i connect them to?

Any help would be greatly appreciated!

Cheers

Craig

 

[calais_cruzin]

Splice it into the illumination wire, its brown/yellow trace, u can find one at ur wiring for ur headunit

 

[holdendude]

Splice it into the illumination wire, its brown/yellow trace, u can find one at ur wiring for ur headunit

thanks mate, is that the + or - wire?

 

[HRVATSKI_VOJNIK]

the illumination is negative triggered, in the VS it's the orange/white wire

 

[holdendude]

the illumination is negative triggered, in the VS it's the orange/white wire

So that'd be the same for my VR, ok, if thats negative, then where to I connect the Positive wires?

 

[HRVATSKI_VOJNIK]

to the positive orange wire next to the neg wire

 

[holdendude]

Ok thanks mate, I might give it a go this weekend!

 

[Dum*P*ster]

Keen to see HoldenDude!!!

Also, im keen on doing this too.. Is the colour the same for VP and - aswell?

 

[holdendude]

Is the orange positive the thick orange one with a red trace or a creamy orange wire?

 

[holdendude]

Anyone????

Anyone know?