Power window switch pinouts

[matty88]

Hey all

Looking at doing a power window conversion on a TWO door car, so I've decided to make my own loom and run the switches on the centre console

I've chosen VR/VS rear door switches (simple up/down) and want to know the wire colouring/pinouts so I can wire them up to my own loom

Any help would be great

 

[sssmechanicholdenbrisb]

well one is signa-powerl two are signal out
if is theree wire rear door type..... just hold switch and test pins with multimeter else i cant tell you off by heart. may not help but you never know

 

[matty88]

Thanks for the input, was wondering if anyone knows the wiring colours and what they do

 

[matty88]

Got the switches sorted, now I want to run a relay(s) to each window, any ideas how to do so?

 

[wamboin23]

Here ya go.

they are 5 pin change over relays, one setup in each door, so you'll need 8 relays

 

[markovr]

I did mine like this but I had to use those relays with a normally closed contact and normally open one like what is used a commodore vn/p/r/s fuel pump relay and lugged the wires so I didnt have to cut any original wiring

 

[wamboin23]

yeah mine are change over relays too.

good idea with the plugs, makes it easy to put back to standard

 

[matty88]

Cheers for that guys, I used this setup:

http://www.the12volt.com/installbay/uploads/winswitchmotor.gif