Kicker tweeter wiring with crossover

[milzy29]

hi, i just bought kicker rs60.2 speakers and i need help with wiring them up to the crossovers provided in the pack.
The crossover goes:
[output] [ input ] [output]
- Mid + - Mid + - TW - - TW +


This is what i have done so far, i have taken out my stock speakers in the doors and plugged the wire into the Mid on the input section, i took out the stock tweeters and joined extra wire onto the stock wire and then i connected it to the TW input section. i then ran wires from the Mid output to my new door speakers and i then ran wire from the TW output to my new tweeters, is that correct or is the wire that was leading to my original tweeters already made so that it only gets high frequencies?
cheers

 

[mummbles]

Take em back to the store and get another brand.
I went through about 5 sets of those speakers all under waranty. The way they've built them for some reason allows the the terminals to short on the basket and they cut out (or the head unit detected the short and shut down that channel)
Loved the sound, hated the problems!