Connecting LED's to the central locking ???

[VS commy]

I did a search but couldnt find anything, im fitting my vs commodore with LED's inside and out, having a switch to turn them all on and off for show.. question is how easy and how would it be to connect the outside LED's to the central locking? ( so they flash on and off with the intercators when i hit the button) cheers

 

[SweetWagon]

You would have to wire it into the BCM using a relay and a diode, but its do-able.

 

[SweetWagon]

was bored so this is what I came up with, Enjoy

Edit: make that diode 10-15 amp

 

[caaf]

I'd stick the diode on the relay and just tap into cable save having a point of failure for the existing wiring loom

 

[the_boozer]

sorry didnt read that too well better go outside and contiue drinking for the week end

 

[SweetWagon]

I'd stick the diode on the relay and just tap into cable save having a point of failure for the existing wiring loom

Hmm no has to be after the relay, else it will get a backfeed from the indicators

 

[caaf]

Sozz understood- - I'll go outside and continue drinking for the week end