holden_89
New Member
- Joined
- Aug 15, 2011
- Messages
- 9
- Reaction score
- 0
- Points
- 0
- Location
- brisbane
- Members Ride
- VN Executive 3.8V6 M5
ive just put a 93 vr v6 motor in my vn but it still has the original series 2 comp and wiring harness. now wen i turn the key the car will kick over but it seems no fuel is coming through (replaced fuel pump and tested so aint that) also no dash lights will light up unless the handbrake is on which is the only light that shows except the low fluid level light if the fluids are low. everything is wired up correctly and hoses are in the right place. now i have a black box with a sticker that says QC pass, now ive taken it to a few different ppl but they cant tell me wat it is, i took it out when i had my old motor in there and it worked fine. some ppl think it may be a body control module. if so does any1 have a diagram on how to wire it back up or does any1 have any other theories to what it might be. its got me stumped......
