Jxfwsf
Well-Known Member
just wondering if anyone has a schematic for the dash wiring of a vr. In the middle of a project transplanting vr v6, auto, engine loom and ecu into an old series 2 vn, have all the connection/pin relocation's done, ecu reprogrammed with vats off as i'm not using a bcm at this point in time, so far it's all up and running except for the pwr light on the dash...... from all the schematics i can find on the net, ecu wiring or bcm wiring i can't find anything to point me in the direction of where the light is triggered.
So far it's not as simple as running a wire from the switch to the dash as the globe in the vn dash is earthed constantly with a +ve feed through it's plug to illuminate, the switch and console which has been raided from a vr at the wreckers is an earth switch according to the wiring schematics.
So far it's not as simple as running a wire from the switch to the dash as the globe in the vn dash is earthed constantly with a +ve feed through it's plug to illuminate, the switch and console which has been raided from a vr at the wreckers is an earth switch according to the wiring schematics.
Last edited: