maginoodle
Active Member
- Joined
- Apr 14, 2006
- Messages
- 827
- Reaction score
- 69
- Points
- 28
- Members Ride
- vy series2 ss crewman
Hi all, i have put a vn motor into a gemini. I used the info from my project thread(link in my sig) to wire it up.
I have a check engine light coming on but when i try to read the codes it shows only a code 12(system ok).
What i think is happening is that there is no constant power supply to the ecu and therefore any codes are gone as soon as i turn the engine off.
My question is which wire do i need to give constant power to so that the ecu will remember the code?
Any help appreciated.
Cheers Shane
I have a check engine light coming on but when i try to read the codes it shows only a code 12(system ok).
What i think is happening is that there is no constant power supply to the ecu and therefore any codes are gone as soon as i turn the engine off.
My question is which wire do i need to give constant power to so that the ecu will remember the code?
Any help appreciated.
Cheers Shane