Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

HID Lights hsv maloo vz ( same as vz ss)

harley.t

New Member
Joined
May 16, 2012
Messages
13
Reaction score
0
Points
0
Location
Darwin
Members Ride
z series my06 maloo r8
hi, im having some difficulties wiring my hid lights for my low beam (h11) and high beam (h9)

the low beam has a red/white wire and a red/blue wire

the high beam has a red/white wire and a red wire

my question is which wires a positive and negative (for the low and high!)????????

i nearly had it wired, i had my left low and high beam wired and it worked normally but weird s**t happened when i wired in the right low and high beam. weird stuff like the left low beam would stay on, even when the lights were switched off and the right wouldnt come on at all. i tried swapping polarities of one then a flickering would occur so i gave up and now would like to start from scratch. please help!
 

Deepo1985

New Member
Joined
Oct 19, 2011
Messages
150
Reaction score
5
Points
0
Location
Sydney
Members Ride
Vz sv6
I beleive the h11 low beam is + red with white stripe wire and the - is red with blue wire , was just reading that on another thread on here .... Not sure on the hi beam , but if you do the low beam then it makes it easy to figure out the hi beam as there's only 2 ways it can go
 
Top