Vn right side dash switches converted to Calais but inductors won't work

[mitchb727]

Ok so I bought the Calais switches for right sides stalled now the hazard light switch is gone so no indicators how would I get the indicators to work with out a hazard light switch

 

[markovr]

Without the haz switch there is no power being fed to the flasher unit on the blue/white wire that would normally get it from fuse 2 through the contacts of the hazard switch so you basically need to put 12v on this wire by jumpering from the brown/white wire (12v)on the switchblock connector to the blue/white wire on the switchblock connector or jumper from fuse 2 to the terminal of the flasher unit with the blue/ white wire in it at the fusepanel

 

[m1lky]

Can you just plug the switch in and hide it somewhere in the dash?

 

[mitchb727]

Thanks for the reply markovr I will try this because I have don't what m1lky suggested witch was plug it in and shove in dash
Either of you guys know where hazard switch is located in the calais