Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Remote cental locking

9

97VTSS

Guest
Hi All,
I recently disconnected the battery in the VT and when I reconnected it the remote door lock was not working.
I can open and lock the doors with the key and the car still starts.
I replaced the remote sensor but it's still not working and now the red light above the mode switch still flashes when the engine is running.
Is there any procedure after the sensor is installed to get it working and why does the red light still flash.
Any help would be appreciated.
 

PRAVX II S

Member
Joined
Jan 21, 2010
Messages
918
Reaction score
7
Points
18
Location
Australia
Members Ride
Commodore
Yeh. Wish I had a tech 2.
|

Go to a private work shop that has a diagnostic reader. Ask them to read the code for you.
They probably will charge like $20-30 or if your lucky they wont charge anything.
Thats the best place to start.
Do you have another key? If so give that ago.
 
9

97VTSS

Guest
Yeh tried all that except changing the bcm.
I'll get the codes checked.
 
Top