Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

WHII Statesman - Analog clock and High Beam Indicator not working. Are they related?

Candive

New Member
Joined
Sep 25, 2009
Messages
24
Reaction score
0
Points
0
Members Ride
WHII Statesman
I've noticed that my analog clock stopped working as well as my high beam indicator light on the dash not glowing when I have my high beams turned on. It could just be a coincident or maybe they are related. I do not know. I checked the fuses and everything is ok.

Before taking the vehicle into a shop, is there anything I could further do to investigate/fix these two problems?

Does it also mean that the entire dash has to come off just to replace one light bulb?

kind regards,

Candive
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
586
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
As far as I can tell there is no relation between the two.
Unfortunately the dash surround and instrument cluster have to be removed to replace a bulb.
 

s_ikari2015

Fun IS easier with an 8
Joined
Nov 16, 2007
Messages
697
Reaction score
30
Points
28
Location
Australia
Members Ride
'02 Monaro V2 CV8, '90 Toyota Sera
it's really only a 15 min job. a few screws and a bit of force to remove the dash surrounds, then two more screws to take the cluster out (disconnecting switches and plugs on the way). You will need a T5 Neo Wedge globe as the replacement.
 
Top