Reverse lights, HELP

[Matty14]

I have a reverse camera on my vu then I put a eagle eye next to it for better vision and I took the tub liner out to do some other work with the sports bar then just recently I put another eagle eye next to the camera and put the tub liner back in and now nothing works in reverse so I cut the power to the 2 eagle eyes and its still not working? Would anyone know what the problem is because I have no idea?

 

[MYVESSV8]

connection to your reverse lights, maybe you've missed a connection or an earth

 

[Nut Kracker]

Where did you mount the camera?
And where did you run the wires?
Maybe when you put the tub liner back in, you have pinched a wire and it has either fractured the wire, or it has shorted out.
Check the wires very carefully for any damage.
Just the smallest piece of missing insulation from a wire and it can short out.

 

[Tasmaniak]

Why did you need to remove the tub liner? Whats an eagle eye?

 

[Matty14]

All the connections are good at the tail lights

I mounted the camera between the license plate and the hole to get the tire out and it's in the ute not screwed on then I followed the wires along the trailer connect plug
Well when I put the tub liner back in I stripped the aerial cable and that may have shorted something

I took the tub liner out so I could mount a aerial on the sports bar so I could feed the cable thru the side panel then to the cab. And a eagle eye I's a small circle that has 2 LEDs in it

 

[Sabbath']

Here's the same wiring diagram Nut Kracker posted for you in your other thread

 

[Nut Kracker]

Are the reverse lights working?
Check number 12 fuse as shown top left of the diagram ^^.

 

[Matty14]

Nope
All fuses work

 

[Nut Kracker]

Check the reverse light switch?
Just join the 2 wires on the switch and see if the reverse lights come on.
Join them with ignition off and fuse out.
Then test.

 

[Matty14]

What reverse switch?