GASSD6
New Member
- Joined
- Jan 20, 2013
- Messages
- 11
- Reaction score
- 0
- Points
- 1
- Location
- mornington pen
- Members Ride
- vz berlina
Hi guys iv looked and looked and im sure the answer is out there some where but !! here goes, I have a vk 202 est model has been converted to a 308 and im having trouble trying to nut out the wiring. the car was fitted with an electronic calais dash which i pissed off cause nothing really worked, so i put a tacho version berlina dash an loom back in it but can not get any thing to work.
Am i correct by saying i can remove all the est loom and box and just run a std eng bay loom ? Cause i really dont know what looms in it atm, it starts and runs fine but i wanted to connect up the gauge for the berlina dash or will the loom be different from berlina to std model ??
I know the main eng bay plug near the booster as far as i know all i need from there is coil wires, brown Alt, green temp, blue oil but when i earth these out the gauges do nothing.
Am i correct by saying i can remove all the est loom and box and just run a std eng bay loom ? Cause i really dont know what looms in it atm, it starts and runs fine but i wanted to connect up the gauge for the berlina dash or will the loom be different from berlina to std model ??
I know the main eng bay plug near the booster as far as i know all i need from there is coil wires, brown Alt, green temp, blue oil but when i earth these out the gauges do nothing.