Vy wiring help

[Zlimes]

Hello guys I have just installed the whole vy into my vt

The problem is no power it could be the battery but can't rule that out yet

I haven't changed the inhibitor switch to a vy one as of yet

But if any one has done something like this with any other commys can use let me know how use went

 

[hotrod]

a whole what?

 

[hotrod]

if its your cluster good luck?

 

[Zlimes]

Removed all the vt wiring
Replace it with the vy
Body and engine wiring
So I can get the vy cluster to work with the vy dash in my vt

 

[nathanVY]

One of the wires that goes onto the +ve battery terminal powers all the electrics, make sure you've got it all plugged in correctly & check the battery to body earth lead too .

 

[Not_An_Abba_Fan]

Do you have the VY ECU and BCM as well? I think the BCM controls some dash components so if the VY BCM isn't there, it won't talk to the VT BCM.

 

[Zlimes]

Have all the bcm ecu key head from vy but it a low and I'm runing power windows
Some dude said I need to get vy fuel pump and vy inhibitor switch witch I allready got

 

[Zlimes]

Does the fuel pump matter ?

 

[nathanVY]

Does the fuel pump matter ?

The pump its self should be the same but there's likely a difference in the sender, at some point holden reversed the polairty - still everything should work your fuel gauge might just be inverted.

 

[Zlimes]

Ok a mate that good with commy said
That positive 1 on the fuse block
I'm not sure on what He means lol