Alarm Question

[ElDubya]

Hi all,

I am facing a challenge and need help, big time!

I have installed a car alarm into my VR SS today, and everything went as smooth as silk, UNTIL I got to the central locking. I am using the central locking that came with the car and I find I have 4 wires left over from the alarm loom. They are :

White - Lock
White/Black - Unlock
Blue - Door Switch (-)
Green - Door Switch (+)

I understand that the Commodore needs a negative pulse to work the central locking, and that is where the drama is starting to unfold. Using my test light, I have found 1 wire from the Commodore door loom that emits a 12v pulse when locking the door, and another that emits a 12v pulse when unlocking the door.

My question is this :

Which friggin' wire goes where?!!? ... lol

Also, would I be correct in assuming that the Door Switch (+) and Door Switch (-) wires go to the interior light switch in the drivers door?

Any help would be greatly appreciated, and may save me from baldness.

Thanks.

[daron]

put ya blue wire to the door pin wire
cut the green one off you wont need it
the 2 lock/unlock wires are in drivers side trim / air vent take it off 1 big plug
brown wires
poke round till 1 locks and then one unlocks with your test light on earth

[ElDubya]

Thanks heaps mate, you're a champion