VT Berlina BCM and Loom

[dazza33]

Hi, have bought a VT Berlina Loom and LUX BCM. It is complete with internal and external fuse racks etc.

I have a 98 VT Wagon Exec and i want to replace its loom with the one above.

If i was do so would i run into difficulties plugging the exec components into the upgraded loom. For example i will be keeping the old heater aircon setup, the same dash cluster and so on. Basically i am doing this to install electric windows just at this stage. I will down the track install the extras, maybe.

The other question is: Regarding the BCM, could i upgrade the LUX with a HIGH using the above Loom from a Berlina?

Some advice from those who have been down this track would be appreciated.

Cheers, Darren.

[accentstencil]

I really don't know for sure but I think the wiring for the climate control would be completely different to that of the standard air conditioning, so I foresee problems there and possibly in other areas as well. But I might well be wrong.
For power windows you would only need a low series, MID level BCM, door looms, regulators, switches, relay and a fuse (circuit breaker).
Ask Doctor Bob, he has a thread in "the Pub" section entitled " Ask the Holden Technician"