Could someone please tell me if the 'Service Reminder' that comes up on the odometer needs to be reset or does it reset itself. Thanks.
it can't do it itself...
the dealers service guys will reset it
or you can do it yourself....
details in your owners manuals
Smitty...with the VE SSv SII Sportswagon, VK race car and... Kwaka ZX12R
can you put it on this thread? I don't have that model but am interested in how you do itOriginally Posted by Smitty
Hold down only the up & down arrow buttons (below the mode button) of the trip computer.
Turn the ignition to ON
After about 3 seconds the service reading will appear
Release the up & down arrows
You'll hear a beep
Hold the up & down arrows again & it should reset
Turn the ignition off.
No more service warning
(that's off memory so hope it's accurate- but it is in the standard manual that comes with the car).
We tested the way of doing this. We did all steps but it does ask a Question Service Reset? you then push set this will reset it and hold down up and down arrow and then turn off ignition then you can start the car without it being there.
Your first post on this forum is digging up a thread, that is over 3 years old.
I like my roo well done
hold down TRIP and at the same time turn the the KEY to " ON " it should come up on the screen RESET SERVICE. Let go of the trip button and and push and hold the UP and DOWN button on the left side of the steering wheel for 3 - 4 seconds it will bip My name is Chris and i work for Holden
it says he has a vy they dont have the trip button...vy hold the two arrows with ignition off turn key on holdin the arrows for bout three seconds let go it shud beep...the u shud be able to hold set n it will reset...u might ahve to press mode before holdin set.
thank you all again. 90'000 k service done.
is there anyway of programing the service reminder to go off at a certain amount of km's or is it programed in and just goes
off at the basic km's
Last edited by ClairBear; 27-10-2012 at 05:57 PM. Reason: We don't email answers.
Thanks guys. all done
That refers to VT/VX,on the VY/VZ's you need to hold down the 2 top buttons turn the key to on and then a service light will come up to reset service light/oil light,then press and hold the set button and till it beeps then done.