Pulley Kit Upgrade for my VS Statesman II S/C?

[Turko]

Hey guy's,

I was thinking of purchasing a 10PSI pulley kit for my S/C V6 Stato.
My car is stock as rock right now just bought it, With no Mods carried out to it atm.
Someone told me that a 10PSI pulley kit will be to much for my Stock Engine to handel? Is this true.
How much Power gain will i see by upgrading my pulley kit to 10PSI without an Upgraded Exhaust System for the time being. And is it safe to do on a Stock S/C V6?

- Turko

[Blown V6 Hatch]

Who ever told you that your engine wont handle that is full of sh*t!!! A 10 psi pulley kit is the best bang for your buck power upgrade and does not require any other mods. My advice, do it.

[Turko]

Originally Posted by VN Calais 5.0

Who ever told you that your engine wont handle that is full of sh*t!!! A 10 psi pulley kit is the best bang for your buck power upgrade and does not require any other mods. My advice, do it.

Guess who told me that lol. Some fu'ckin Auto Elec/ Mechanic. He had a Supercharged 6 and said you need work done to youre engine to handel it lol

[Tonsta V6 S/C]

Definitely 100% Guaranteed there is no problems with running 10psi on a Factory Supercharged L67 V6 Engine. We have done hundres of these Australia Wide with excellent reports and feedback over the past 5 years, there has never been any negative reports or feedback.

As a couple of the other guys have mentioned and we 100% agree the 10psi Boost Upgrade is definitely the Best "Bang-for-Buck" Upgrade you can ever do for your Supercharged V6

Adds a whoe heap of Power, Torque, Throttle Response and Acceleration to make the car more fun and exciting to drive

Hope this helps.

Regards

Tonsta

[DEDMAN]

Originally Posted by Turko

Guess who told me that lol. Some fu'ckin Auto Elec/ Mechanic. He had a Supercharged 6 and said you need work done to youre engine to handel it lol

Hey Turko...Have Ya Done The FIT Pulley Upgrade Yet...

[DEDMAN]

Originally Posted by Tonsta V6 S/C

Definitely 100% Guaranteed there is no problems with running 10psi on a Factory Supercharged L67 V6 Engine. We have done hundres of these Australia Wide with excellent reports and feedback over the past 5 years, there has never been any negative reports or feedback.

As a couple of the other guys have mentioned and we 100% agree the 10psi Boost Upgrade is definitely the Best "Bang-for-Buck" Upgrade you can ever do for your Supercharged V6

Adds a whoe heap of Power, Torque, Throttle Response and Acceleration to make the car more fun and exciting to drive

Hope this helps.

Regards




Tonsta

Hey FIT Tony...Have Ya's Made Anything To Do With The Eaton M90 To EatonM112 Yet...Thanx In Advance

[holdenup]

deadman, im sure Tony will answer the qeustion eventually but from my knowledge i dont think fit have anything avalable for a m112 conversion. Obviousy if you are going a larger s/c you have maxed out th m90 therefore intercooling would have been done. I dont think the m112 will fit under the bonnet using the adaptor plate without bonnet modification. Im not sure but i think fit can still get more out of the m90 so maybe when all the horsepower is extracted from the m90 fit may give it some thought.
I could be wrong wait for the boss to answer

[phat88]

Originally Posted by Turko

Hey guy's,

I was thinking of purchasing a 10PSI pulley kit for my S/C V6 Stato.
My car is stock as rock right now just bought it, With no Mods carried out to it atm.
Someone told me that a 10PSI pulley kit will be to much for my Stock Engine to handel? Is this true.
How much Power gain will i see by upgrading my pulley kit to 10PSI without an Upgraded Exhaust System for the time being. And is it safe to do on a Stock S/C V6?

- Turko

hi i believe this true but thats the only thing my stato is missing if u find out can u please let me no

[phat88]

hi so i have been told the same thing but not sure thats the only thing my stato is missing so if u find out can u let me no thankz