Covering front mount with bumper

ascension24 · #1 18-05-2006, 12:13 PM

Just curious, see in this pic

Would there be much power loss due to the covering of the front mount like that?

Tonsta V6 S/C · #2 23-05-2006, 01:36 AM

None at all, that particular car makes 277rwhp and is good for low 12's

Seems to be working comfortably from that resume

Regards

Tonsta

daz08 · #3 15-06-2006, 09:30 PM

I was lookin in a street commys mag and it has a bit on iculkn in there, and when hes on the strip he has a different front bar on with the middle cut out and the whole cooler exposed

daz08 · #4 15-06-2006, 09:30 PM

I was lookin in a street commys mag and it has a bit on iculkn in there, and when hes on the strip he has a different front bar on with the middle cut out and the whole cooler exposed

kwik6 · #5 15-06-2006, 11:54 PM

no cooler should be covered by a front bar. If anything he should cut the lower lip of that bar to make it thinner and run mesh over it or something.

muvro · #6 17-06-2006, 02:17 AM

Quote:

Originally Posted by kwik6

no cooler should be covered by a front bar. If anything he should cut the lower lip of that bar to make it thinner and run mesh over it or something.

As Daz said, the bar pictured (at my workshop.... LOL) is not the bar he uses at the drags. The bar with the cut out serves it purpose but doesn't look as good as the one pictured.

kwik6 · #7 17-06-2006, 02:23 AM

yeah i know but im saying that even if im going to use it on the street i would prob cut that bar in the picture a little thinner along the bottom lip so more air gets to it.