identify this diff??

[vk.jonno]

ok its on my HQ one tonner and i know they are usually sailsbury 10 bolt diffs.
but they usually spin both wheels. this only spins the right wheel.
and yes it matters... to me
here are some pikkkies

[DANNY8]

Yeah it's a 10 bolt....open wheeler (not LSD) by the sounds of it lol.

[Blown V6 Hatch]

As DANNY8 said, 10 bolt Sailsbury. What ratio is it?

[Calaber]

The ratio should be stamped on the front of the pinion seal shield, directly behind the uni joint. From that second last pic, you'll need to scrape a bit to get to it.

[burnz]

ok its on my HQ one tonner and i know they are usually sailsbury 10 bolt diffs.
but they usually spin both wheels. this only spins the right wheel.
and yes it matters... to me

yeah i know what your thinking, so it's not an LSD.
should i or should't i.


eBay Australia Store ? Street and Strip Gears: Search results for.

[DANNY8]

yeah i know what your thinking, so it's not an LSD.
should i or should't i.


eBay Australia Store ? Street and Strip Gears: Search results for.

That's wat I done with the diff in my wagz.....got it from the same mob in the link too.

[vk.jonno]

sorry guys ive been buisy so i havnt had time to go on,
unsure of the gearing and i cant check cos my chassis is off to get sand blasted and all that stuff dad has dumpd at his mates factory.
i have some donor wb statesmens so i mite grab one off that

[vk.jonno]

or ill just get a minispool, probooboboly spool it i guess wont i need to get the diff rebuilt if i do that though

[vk.jonno]

The ratio should be stamped on the front of the pinion seal shield, directly behind the uni joint. From that second last pic, you'll need to scrape a bit to get to it.

ok i went out wih a can of degreaser and a high preasure hose and it is....
"4 2803" does that sound right? i wouldnt have a ****ing clue LOL
i took a pik too but i vant find the cord