ust changed dash, aircon,and wiring loom from my v6exe to v6calais ive got every thing working but there is no power to the fuel pump, iv'e checked all fuses and relays and i have tested the pump and it works doe's it have anything to do with the imobiliser overide switch that has been riped out? or if any one has the wiring diagram for the fuel pump, could you send it to me any help would be appreciated
check this link for wiring diagrams
Rob's Creative Calibrations - Wiring Diagrams
the pump gets it's signal from the PCM, it should turn on for a few seconds when you turn the key to the on position and then stop. once the engine cranks and starts then it turns the circuit on again. have you checked the fuel pump relay and fuse?
there is also and output on the diagnostic plug for the fuel pump, however i can't remember which pin it is. if you put an LED on this output on the diagnostic plug you can see if the PCM is turning the circuit on.
Last edited by immortality; 25-01-2008 at 04:08 PM. Reason: add
Body by Holden, Soul by Brock
the Legend will live forever
VN exec T5: 15.1sec @92.2mph 1/4 mile, 9.7sec @ 74.6mph 1/8mile, 2.3sec 60ft, 0-60mph 6.827sec 22/11/07 Gtech competition