does a vn valley cover fit a vr 3.8 v6
as said above, i want to get this item off ebay, a twin throttle body valley cover right, but its for a vn, now it looks pretty much the same as the vr, all the water pipes and what avue are in it, unlike the ecotec is different,
also because its got 2 throttle bodys, how would i run the sensors in there? can i just get the same plugs that i need, with a bit of wire on them, and join them into the wire on the orignal plugs, like slicing the original wire on the car and adding the extra ones in so i can use the extra plugs, sorry if this sounds confusing as its hard to explain
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
better to reign in hell
VN series 1 is different.
dunno about your sensors.
"The mind is its own place, and in itself, can make a Heaven of Hell, a Hell of Heaven."
apparently wasting my time with 97 cubic inches
milk doesnt come in 1.6 litres
my geminis
sensors are pretty much same, all the water outlets are different
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
Not the wiring though, the alternator wiring is a different length and the sensors under the S2 alternator are the same, but in different locations on the S1 (at the rear).Originally Posted by peckzz
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote