Results 1 to 6 of 6

Thread: VT S2 Diff in Brisbane

  1. #1
    Ride
    VT 2

    Join Date
    Nov 2008
    Posts
    414

    Default VT S2 Diff in Brisbane

    Mobi Diff's at Springwood are doing up a 3.73 LSD ABS Diff with a 12 month warranty, new bearings and seals, and Fitting it for $1400.00

    They come well recommended, offer the longest warranty, are using new genuine gear stock.

    I will have it fitted friday and can finally get rid of the single pegger abs 3.08 i have.

  2. #2
    Ride
    VT 2

    Join Date
    Nov 2008
    Posts
    414

    Default

    Diff is in and the car is a gem. It seems to drop into higher gears sooner, and isn't labouring to do anything.

    It's a bit like driving a manual when your in that relaxed carefree mood where you drop a cog a little early and cruise. Acceleration wise tehres a noticeable change. Go's a bit harder. On take off if you spool up against the brake and step off the brake rapidly it will launch hard. If you feather the brake it will break traction and static winding up to about 4800 rpm before picking up traction again. Too much smoke for a fast launch.

    Drive out of corners is much improved, instead of leaning on the outside tyre and driving from the inside it now plants and drives from both sides. Car sits flatter and feels markedly more confident. Invites you to go harder.

    Good job by Mobi, although it turns out they under quoted me - assumed I already had and LSD and I didn't.

    MOBI Diffs and Gearboxes
    12 Brennan St Slacks Creek
    Ph 07 3808 4576

  3. #3
    Ride
    VP Executive R-spec

    Join Date
    Jan 2005
    Posts
    7,910

    Default

    NIce one how did you go with the speedo ? are all the shifts still working good etc?

  4. #4
    Ride
    VT 2

    Join Date
    Nov 2008
    Posts
    414

    Default

    Therein lies a real saga....

    Spoke with 3 Holden service centres, they all said they could do it. I took it to the closest - Village motors at Petrie. They got it well wrong... Then told me it can't be done. So i checked with 2 other Holden service centres, 2 auto sparkies and a specialist tuner. they told me it can. I did my own research, and even found holdens own tech 2 guide on the web, complete with how to enable cop mode, what ppm settings for which wheels, and how to enable the police calibration mode. Took it to Village motors and they said "We won't use anything that we don't get from holden ourselves" ....

    Which could be understandable, they wouldn't want to use some failures half arsed guide and get it wrong.

    Anyway, I ended up emailing Village motors tech directly, sent him what I found, and had him check it out.

    They called me up and said bring it in thursday we've found out how to get it done....

    Results tomorrow maybe....

    Anyway - I'm not changing the BCM at all, just re-calibrating the dash. So shift points / road speeds will remain the same as far as the BCM is concerned. Theres no feedback from dash to BCm that I need to worry about.

    Oh and how does it drive with the well modified gearbox ? Ummmm - dont flat shift into second unless you want to wheel spin for 30 yards at 60ph.

    Spool it up against the torque converter, ease off the brakes and it will smoke off the line. The last bit of retardation from the front brakes is all it needs to break the rears free. Step off the brakes fast and it squeaks and gits. Hard. Magic. Should have been the factory diff. Economy seems better at city speeds too.

  5. #5
    minux's Avatar
    minux is offline Infidel Bear
    Ride
    300rwkw FG G6ET/2011 Sti Spec R Hatch
    Mini Putt 2 Champion!
    Join Date
    Feb 2005
    Location
    Melbourne
    Posts
    6,879

    Default

    Quote Originally Posted by Tsunamix View Post
    Oh and how does it drive with the well modified gearbox ? Ummmm - dont flat shift into second unless you want to wheel spin for 30 yards at 60ph.

    Spool it up against the torque converter, ease off the brakes and it will smoke off the line. The last bit of retardation from the front brakes is all it needs to break the rears free. Step off the brakes fast and it squeaks and gits. Hard. Magic. Should have been the factory diff. Economy seems better at city speeds too.
    I thought you were against hooning?
    "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
    - Theodor Seuss Geisel



  6. #6
    savage1987's Avatar
    savage1987 is offline fail champion
    Ride
    LS1 VN + 304 VN
    Blackjack Champion!
    Join Date
    May 2005
    Location
    Townsville
    Posts
    3,533

    Default

    Quote Originally Posted by minux View Post
    I thought you were against hooning?
    *waves

    I'm against hooning, but I still love to give my cars a hiding sometimes Yes, usually on a public road.

    BUT!

    Spirited driving that is situationally appropriate, and hooning in the suburbs running over kids, not same same.

    Sam
    WTB: mulberry VN interior parts

Similar Threads

  1. whats the diff between the diff diffs?(wagon and sedan)
    By redrags in forum VL Holden Commodore (1986 - 1988)
    Replies: 7
    Last Post: 30-05-2009, 09:51 AM
  2. wanted - VN/P diff and housing - brisbane
    By rexsportwrx in forum Swap / Wanted to Buy / Trade
    Replies: 3
    Last Post: 20-06-2008, 01:12 AM
  3. Wanted VB-C-H LSD 6 cyl diff ( the weak one ) - Brisbane
    By Gus The Snail in forum Swap / Wanted to Buy / Trade
    Replies: 2
    Last Post: 17-12-2007, 09:27 PM
  4. FS: VS series 2 lsd v8 diff (complete rear end) - $450 - Brisbane
    By Whitey in forum Parts And Other Items For Sale
    Replies: 0
    Last Post: 11-09-2007, 08:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71