center cap to guard height

[DLFHUB666]

Hi guys an girls
got my vx ss lowered a couple of years ago by pedders an cant remember what springs i had put in i think sl
but not 100% on that an i cant read the part numbers on the springs so i thought you might be able to help if i tell you my center cap to guard height its roughly 330mm on all corners also its on 19s
Cheers DLF

[soop]

Super lows should lower the car by about 40mm. So whats the sill to ground measurement?

[glenn l]

im assuming it has pedders coils in it, pedders measure there spring different to every one else, they measure from the bottom of the wheel to the guard(shit way to do it cause if you have different height wheels it a different measurement). depending on what the store fitted(stores in melbourne will fit different part# store to store) you could have front 2151=610mm, 2275=590mm and 6412=600mm, on the rear 2643=610mm, 2641=585mm and 6419=600mm, these are an average and can change a couple of mm either way. part numbers starting with a 2### are red sports ryder coils and part numbers starting with a 6### are grey touring coils. hope this is of some help. these measurements are with your 19" wheels, you add or subtract 12.5mm for every inch smaller or higher your wheels are.

[DLFHUB666]

hey soop sil height ??? is this sideskirt height ???

[DLFHUB666]

hey glen looks like this could help cars at home though im at work so will see at lunch cheers an i have sports ryder in the rear an touring in the front

[glenn l]

if your got 6412 in the frt you should have about a finger to finger and a half gap from tyre to guard and if your got 2641 in the rr it should be on top or slightly over your tyre.

[DLFHUB666]

if your got 6412 in the frt you should have about a finger to finger and a half gap from tyre to guard and if your got 2641 in the rr it should be on top or slightly over your tyre.

rear sounds about right the front is lower than that i think will check at lunch cheers mate

[DLFHUB666]

if your got 6412 in the frt you should have about a finger to finger and a half gap from tyre to guard and if your got 2641 in the rr it should be on top or slightly over your tyre.

yep got 6412 in frt an 2641 in rear thanks for your help 1 more thing can you tell me what they are
l, sl, ssl or sssl went on pedders website found the springs but not there height (most probably looking in the wrong place) thanks alot

[DLFHUB666]

just rang pedders an they are useless the chick on the phone told me the dont do l, sl, ssl ,sssl like king spring an i said so you just have 1 height of springs an she said no we have different heights an i asked for the different heights of these springs an she said she dosent know there is no way to tell WTF
anyway can someone tell me what the standard height of a vx ss on fe2 is so i can try an figure out how much it has dropped Cheers DLF

[glenn l]

the frt is a sl and the rear is a ssl, yeah pedders dont classify their coils low or super low they just call them sports ryder.

[DLFHUB666]

cheers bro thanks for that here is some rep
yeah i understand they dont classify there springs like that but i thought they would be able to say this part number spring should lower 50mm give or take a couple of mm... anyway

[glenn l]

nah that makes to much sence.