urgent PCV help

[bigneilsen]

cars an LS1, the PCV hose completely broke through at the back and a small crack in the rubber hose at the PCV valve. i need to just dodgey something up so i can get it to the mechanics.

Can i block off the intake manifold inlet then run a 3/8' hose from one rocker cover to the other?

[ari666]

lol, just put a big bolt in the hose

[mr calais 5.0]

Just run a long hose down past the motor and let it hang..

[Sabbath']

Considering most of time they crack and nobody notices...you'll be fine.

[Dr HaxZaw]

duct tape
electrical tape
sticky tape
masking tape
packaging tape

name a tape and tape it up... although you might struggle with plumbers tape
ive used it on a radiator hose in an emergency and so i wouldnt see it being a problem as long as you pull the hose off and start the tape well about the crack go past it making sure it overlaps by about half and then go a fair way past it and then back up... as long as your overlap it well enough you should be sweet
electrical tape would be your best bet

[bigneilsen]

yeah righto. just capped off the intake side and ran 2 hoses to the ground. see how it goes in a mintue when the silicone dries.

[bigneilsen]

hmm just started it up and now im getting this blueish/burnt oil smoke coming out the hoses.not alot but enough to see, any ideas? im sure that aint normal