Armor all liquid cut and polish

[baby-wilson]

Hey, sorry if I have posted this in the wrong section!

I bought some armor all Liquid cut and polish today...
On the back of the bottle it says... Use only as directed, do not use on glass
I have bore water stains on my car and windows, I used t-cut and it got most of it out but I ran out lol... I used it on my windows and with a fair amount of buffing it worked

So what I am wondering is... Why can't I use armor all on glass? What will it do?
I have a buffer machine so I would just buff it on and buff it straight off...
If I can't use the armour all.. What can I use?
I've tried vinegar, clr etc... None work lol

Thanks

[TinSnips]

A better bet would be something like Autoglym's glass polish. Works a treat. Obviously don't use it on the inside of tinted windows, but I'm going to assume that isn't where the bore stains are.

[naf33n]

i think its more of a warning to cover there arse.. so dumb people dont cover there windscreen in polish and fail to remove it properly and have an accident

[sweefu]

I agree with above, i've even used it on metal before, worked very well. Though for glass, nothing beats glass polish, i've used Mothers with fantastic results.

[baby-wilson]

thanks guys...
honestly... this product is cr#p!
it made no difference to the shinyness of my car... failed to remove bore water stains and when i tried to buff it off with my machine it just came up with dried up black sh#t that wouldnt come off unless i wiped it with my finger... also it claims to remove surface scratches (or something along those lines)... well all it did was fill the scratches with white sh#t that just wiped off, which might be ok if you have a white car... but not a dark red car...
I had to re-wash my car after using this product... waste of time and money! so annoyed lol
i will stick to t-cut in future...

[Luke V8]

thanks guys...
honestly... this product is cr#p!
it made no difference to the shinyness of my car... failed to remove bore water stains and when i tried to buff it off with my machine it just came up with dried up black sh#t that wouldnt come off unless i wiped it with my finger... also it claims to remove surface scratches (or something along those lines)... well all it did was fill the scratches with white sh#t that just wiped off, which might be ok if you have a white car... but not a dark red car...
I had to re-wash my car after using this product... waste of time and money! so annoyed lol
i will stick to t-cut in future...

If you want good results you'll need to buy seperate products..

If you are after a basic filler - then Megs scratch 2.0 then seal it if something like Megs Nxt Gen tech wax 2.0 ... Personally, i will wash, clay and then use either GLARE spider swirl remover, followed by either Wolf Shine & Seal or Megs deep crystal polish followed by Megs nxt gen tech wax.. Pic below of latest detail:

[toey@carfx]

for your windows get some duragloss nu glass polish. this has alot more bite then most other products therefore will remove more watermarks with less effort.