How to keep external wastegate open? Anyone know?

[Commo_Carl]

Not familiar with the PCV system on a VZ. But on mine there is a 19mm nut on top of inlet manifold near top coolant hose that has the valve on a spring inside it. Then the fresh air barb over near the T/B which usually vents to the T/B.

[one_and_only2004]

Put a bung over the throttle body vent hole, and plumb the PCV into a vented catch can, or you can plumb it to the intake side of the turbo

[Commo_Carl]

Lol that's how I had it setup when it was N/A, just without the rocker cover breathers. So now that there are rocker cover breathers I know that pressure can't build up in them, However, won't the PCV still leak boost? I remember reading delcowizzid was very clear about blocking the PCV for this reason. SO confuscious

[one_and_only2004]

No idea mate, I know it's not a problem on my SS

[Commo_Carl]

Hmm will have to see how it goes. Hopefully it is only PCV that is being a prick, nothing else. Thanks for your help dude

[one_and_only2004]

No worries matey, good luck with it all!

[Commo_Carl]

Well I figured out the problem. The drain hose wasn't getting oil away enough. It should all be sweet now.