irs single spinner to lsd

white vn ss · #1 05-12-2006, 05:42 PM

hey all just a quick question

just wondering what i would have to do to change the single spinner in my vq statesman to and lsd? is it a simple centre swap or do i need to source the whole thing?

cheers
rohan

vl rb30e · #2 05-12-2006, 06:05 PM

just the centre or buy a mini spool

Doctor Bob · #3 05-12-2006, 06:54 PM

the easiest way is to just swap the whole coconut for an LSD one

HRT 666 · #4 05-12-2006, 08:20 PM

Quote:

Originally Posted by Doctor Bob

the easiest way is to just swap the whole coconut for an LSD one

I agree much easier and a lot quicker too.

white vn ss · #5 06-12-2006, 06:04 PM

yea thats what i was thinking. would a vp ss irs lsd bolt straight up without hassles? i dont really want to have to buy a later model lsd and change tailshaft yokes etc.

HRT 666 · #6 07-12-2006, 08:02 PM

Quote:

Originally Posted by vq 304

yea thats what i was thinking. would a vp ss irs lsd bolt straight up without hassles? i dont really want to have to buy a later model lsd and change tailshaft yokes etc.

Yea should go in sweet as a nut you wont have any probs, good luck!

POVRTY · #7 10-12-2006, 11:13 AM

if you have abs you will need to try and get a whole center from an abs car. but if you cant you can put old abs axel shafts in the non abs lsd. it will work fine. the abs axels have what looks like cog teeth on the inside right were the irs axels bolt on. if you have any questions send me an email and ill explain a little better