Pulling wires through into the cabin of a car from engine (How to )

[Semtex]

How can I do this ppl. Got a VT commodore, without drilling any holes/


Cheers

Semtex

[Not_An_Abba_Fan]

On the drivers side of the car in the engine bay on the firewall on the outside of the brake booster is a rubber grommet that has a loom running through it. Get a stanley knife or similar sharp knife and cut a small slot in it. Get a piece of flexi curtain rod, the springy stuff that is coated in white pvc or a piece of wire and poke it through from the engine side. Tie or tape the wires you want to it and then pull it through from inside the car. Once everything is where it should be you can put a bit of silicone around the wires at the grommet if you wanted to.