I have a problem with my fuel gauge on my vs comm.
It works fine on petrol but when I switch to lpg the gauge won't move of red and the low fuel light and sound come on.
It's factory fitted so the gauge for lpg is the same as petrol and it worked fine up until today.
Any ideas on what the problem might be?
Aside from, got any gas in the tank? maybe the sender has come lose. have a poke around and see what you can see
How to be a good Australian Citizen: Drive a Camry, Become another number in the system, Dob in all other numbers for un-numberlike behavior (no matter how slight), Base all your opinions solely on the information provided by T.T. and A.C.A., Believe everything our gracious Government Tells you to.
im guessing that the sensor would go off presure? maybe the pressure sensor is broken
For some reason it just started working again this morning. I hate when stuff like that happens
itn't it weird when stuff like that happens.
Cheers
MaT
![]()
Originally Posted by garth
Just a quick note here. I have found with my guage, if I flick it to LPG whilst in motion on petrol, the guage won't show up for LPG and will still show the petrol. Maybe that is your problem too?
If it really bothers you, I would suggest maybe getting a LPG joint to look at the dual fuel control unit and its wiring. Could be a lose wire or solder joint![]()
With the factory fitted lpg you can't change between lpg and petrol unless your stationary.
You just gotta be in neutral
How to be a good Australian Citizen: Drive a Camry, Become another number in the system, Dob in all other numbers for un-numberlike behavior (no matter how slight), Base all your opinions solely on the information provided by T.T. and A.C.A., Believe everything our gracious Government Tells you to.